Aerotech Initiator 29mm 3D Printer Model Free Download

Description Files (12)

Summary

Model rocket based on the Aerotech Initiator 29mm

Length 934mm Diameter 66mm

All pieces should be close to friction fit, if your printer is dialed in. Sanding or modification will likely be required as I wanted this to be a tight fit

Replaceable engine mounts:

Engine block in place for Estes model F15-4 engine. Print the engine mount separately, insert an 29mm engine of your choice into the mount and slide the whole unit into the rocket body. If the engine mount deforms from the heat you can just print a new one instead of printing a whole new body.
Additional engine mount with no motor block so you can fit larger engines. Be sure to add appropriate engine block
Any 29mm Motor should work.

If you build or fly this model let me know how it goes. I am always looking for feedback.

Aerotech_initiator_29mm_2.0_-Nose.stl	1.1MB
Aerotech_initiator_29mm_2.1._-_Motor_Mount_no_engine_block.obj	472.2KB
Aerotech_initiator_29mm_2.1._-_Motor_Mount_no_engine_block.obj.stl	283.9KB
Aerotech_initiator_29mm_2.1_-_Base_No_Motor_Mount.obj	163.7KB
Aerotech_initiator_29mm_2.1_-_Base_No_Motor_Mount.obj.stl	98.1KB
Aerotech_initiator_29mm_2.1_-_Mid_section.obj	178.0KB
Aerotech_initiator_29mm_2.1_-_Mid_section.obj.stl	105.9KB
Aerotech_initiator_29mm_2.1_-_Motor_Mount_Estes_Motors.obj	530.5KB
Aerotech_initiator_29mm_2.1_-_Motor_Mount_Estes_Motors.obj.stl	315.9KB
Aerotech_initiator_29mm_2.1_-_Nose.obj	2.1MB
Aerotech_initiator_29mm_2.1_-_Top_section.obj	115.6KB
Aerotech_initiator_29mm_2.1_-_Top_section.obj.stl	70.8KB

Aerotech Initiator 29mm 3D Printer Model

Summary

Tags

You might also like