Aerator for 1/2" Gardena Hose Connector.
Mat. PLA.
Print with the thread upwards.
I printed this in 3 Processes:
Nozzle 0.4mm, 40% Infill
1.) Height 0 - 2.6mm: 0.2mm Layer, 0 Bottom/Top Solid Layers (=only Infill), 4 Perimeters
2.) Height 2.6 - 17.6mm: 0,2mm Layer, 2 Perimeters
3.) Height 17.6 - Top: 0,1mm Layer (for the thread), 2 Perimeters, 8 Top Layers
Screw it on a Gardena Hose Connector.
| Luftsprudler.STL | 904.3KB |
