Aeon Pro X Forward Trigger MIG 3D Printer Model
The file 'Aeon Pro X Forward Trigger MIG 3D Printer Model' is (stl) file type, size is 51.2KB.
The file 'Aeon Pro X Forward Trigger MIG 3D Printer Model' is (stl) file type, size is 51.2KB.
This is mod for the Aeon pro x to move the trigger to in front of the magazine well. You hold the magazine like a grip (Mag is grip) and then fire using the forward trigger, The stock is just to give the blaster a stock and keep it compact. During priming, you will need to use your shoulder to support, hence the need for a stock. You may use your stock if you want. The stock lock screws into the side of the stock to hold it to the blaster.
The left and right handed refers to whether the user is a left handed or right handed. The arms connecting the trigger will interfere with your hand if it is on the wrong side. So if you are right handed, then you use the right handed models. If you are left handed, then use the left handed models.
The arms connect to the trigger model via dovetail and friction, so just press them together. The arms then connect to the Aeon Pro X normal trigger via a clip, so just press the clip onto the trigger.
The spacer is a 20.4 mm spring spacer. It was used to fill the empty space for the out of darts 143 FPS spring because the spring is shorter than the stock spring.
Demo video - https://youtu.be/uZfq1sjjSXs
Do feedback if any questions
| Bottom_arm_Left_Handed.stl | 16.7KB | |
| Bottom_arm_Right_Handed.stl | 16.7KB | |
| Spring_Spacer.stl | 62.4KB | |
| Stock.stl | 43.3KB | |
| Stock_Lock.stl | 8.6KB | |
| Top_Arm_Left_Handed.stl | 15.7KB | |
| Top_Arm_Right_Handed.stl | 15.7KB | |
| Trigger_Left_Handed.stl | 30.9KB | |
| Trigger_Right_Handed.stl | 30.9KB |
