Toyota AE86 Trueno
1-10 scale
Should fit my Escort chassis with new mounts.
Needs some head and tail lights and bonnet and rear hatch still.
Haven't printed it yet but looks like its ok.
31/8/18
Added solid headlights and hollow headlights with lens for leds
One piece and split bonnet/hatchs
1/9/18
Added pt4 - pt3 with separate doors (dont get them mixed up)
3/9/18
Removed 1.5mm body parts as they were to thin to print and added new 2mm parts with separate doors (no doors yet, still coming)
4/9/18
New pt3, thicker sills and windscreen pillars. (3rd time lucky)
19/9/18
Doors added. One piece and cut in half both vertical and horizontal
| AE86_2mm_pt1_36mm_no_doors_fix.stl | 712.8KB | |
| AE86_2mm_pt2_114mm_no_doors.stl | 605.0KB | |
| AE86_2mm_pt3_146mm_no_doors_fix.stl | 378.5KB | |
| AE86_2mm_pt4_125mm_no_doors.stl | 141.7KB | |
| AE86__2mm_pt5_33.7mm_no_doors.stl | 106.7KB | |
| door_l_2mm.stl | 204.9KB | |
| door_l_2mm_cut_h.stl | 37.5KB | |
| door_l_2mm_cut_v.stl | 50.6KB | |
| door_r_2mm.stl | 33.0KB | |
| door_r_2mm_cut_h.stl | 37.5KB | |
| door_r_2mm_cut_v.stl | 50.6KB | |
| headlight_hollow_1.5mm.stl | 45.0KB | |
| headlight_lens.stl | 7.5KB | |
| Toyota_-_AE86_Trueno_1-10_2mm.stl | 413.9KB | |
| Toyota_-_AE86_Trueno_1-10_bonnet_1.5mm.stl | 32.5KB | |
| Toyota_-_AE86_Trueno_1-10_bonnet_1.5mm_spilt.stl | 40.9KB | |
| Toyota_-_AE86_Trueno_1-10_hatch_1.5mm.stl | 25.5KB | |
| Toyota_-_AE86_Trueno_1-10_hatch_1.5mm_spilt.stl | 32.9KB | |
| Toyota_-_AE86_Trueno_1-10_headlights.stl | 294.0KB |
