The file 'Adjustment Kit For BMW Engines M52U, M54 Vanos 3D Printer Model' is (stl,SLDPRT,STL,STEP) file type, size is 173.0KB.
Adjustment kit for the Vanos in BMW engines (M52 and M54) with dimensions according to the BMW VANOS TOOL 116150. I found the Vanos adjustment measures on BMW forums and made this jig/kit to adjust the Vanos to these parameters.
It worked a charm on my M54 engine swapped Z3 (see pictures) who's vanos got out of wack. Top end power increased significantly after adjusting. I am by no means an expert on these engines, so use at your own discretion.
The part is diagonally 220x220 and the build plate of the ender is 235x235. But most slicers wont let you print to close too the edge. So you could try and enlarge the build platform just a little bit to fit the part. You can do this in Cura at "manage printers". I did this with my Ender 3 and it printed just fine. Maybe you will need to disable the skirt feature.
Step and .SLDPRT provided if you want to change the design
| Holder_Blocks.stl | 122.0KB | |
| Vanos_Adjustment_kit.SLDPRT | 138.3KB | |
| Vanos_Adjustment_kit.STL | 69.8KB | |
| Vanos_Adjustment_kit_STEP.STEP | 138.7KB |
