Last updated: 7th March 2017
I designed this holder because I needed one for my iPad Air.
The basic idea was born when I saw "Foldable Tablet Holder for DJI MAVIC Ver.2" (http://www.thingiverse.com/thing:1982834).
The only thing I missed was that holder from Banggood - so I made my own.
My tabled holder is adjustable from 130 to 185mm (or 108 to 166mm when smaller stopper is used), so it can hold iPad Air and iPad mini too (and other great tablets and phones as well).
Already printed Base and LockKey of this item: http://www.thingiverse.com/thing:1982834/
1pcs M4x12mm HEX-head screw
1pcs M5x25mm screw
1pcs M4 nut
1pcs M5 nut
1pcs M3x20mm screw
1pcs M3x10mm screw
2pcs M3 nut
4pcs woodscrew 2.5x20mm
| arm.STL | 1.9MB | |
| arm_mirrored.STL | 2.0MB | |
| base.STL | 365.4KB | |
| LockKey.stl | 52.6KB | |
| screwhead.STL | 1.8MB | |
| slide.STL | 233.2KB | |
| stopper.STL | 786.4KB | |
| stopper_small.STL | 770.3KB | |
| stopper_wide.STL | 772.0KB |
