Adjustable Picatinny Sights 3D Printer Model Free Download

Description Files (22)

Summary

Iron sight pack made by u/AyyLmaoSinceDayyLmao

Parts/tools you will need to complete the sights:

5x M5X30 screws
5x M5 lock nuts
a small flathead screwdriver

Optional:

Drill
Xacto knife
Sandpaper

Tips:

Print everything in the orientation from the STLs. EXEPT the SIG rear sight housing, it can be printed lying down to reduce support material and increase strength.
Print front sights, front sight posts, and rear sights with a .12 layer height because threading needs a higher resolution.
Use supports touching the buildplate.
The front sights need supports everywhere with an overhang angle of 80 degrees.
Use a small screwdriver to screw in the front sight post with the elevation knob in place.
If the front sight is tight, keep screwing it until its loose. (You should be able to adjust the front sight post with your fingers)

I used PLA+ but you can use whatever you want.

base.stl	106.4KB
base_clamp.stl	20.4KB
front_sight_elevation_knob.stl	136.0KB
FSP_slim.stl	733.2KB
FSP_thicc.stl	605.1KB
FS_ak.stl	719.9KB
FS_ak_wide.stl	775.5KB
FS_chopped.stl	793.1KB
FS_HK.stl	825.4KB
FS_hooded.stl	677.4KB
FS_m4.stl	2.9MB
FS_open_hood.stl	668.9KB
FS_open_hood_wide.stl	669.8KB
FS_SIG.stl	857.9KB
RSH_sig.stl	164.6KB
RSH_the_block_recomended.stl	82.9KB
RS_large_aperturemedium_aperture.stl	522.8KB
RS_large_aperturesmall_aperture.stl	528.9KB
RS_notchlarge_aperture.stl	504.1KB
RS_notchmedium_aperture.stl	499.0KB
RS_notchsmall_aperture.stl	505.4KB
RS_small_aperturemedium_aperture.stl	524.2KB