Mini tripod, comes in 3 leg heights (85, 100, 120mm). Rotate ring to adjust height/leg spread
Requires:
3 - M3 16mm socket head screw
1 - ¼ ½ inch bolt
Optional:
Foam sheet to improve grip when handheld or reduce slipping, use cutting guide
Printed with PETG at 0.15/4 walls/30% infill, clear holes before assembly
Note: gaps at the leg hinge points are at 0.1mm, to prevent/reduce walls getting stuck calibrate your flow settings, I set mine to 95%
(Cross posted in printables with more pictures)
| base.stl | 1.8MB | |
| cut-guide.stl | 334.5KB | |
| legs-long.stl | 5.8MB | |
| legs-short.stl | 6.1MB | |
| legs.stl | 5.7MB | |
| ring.stl | 5.5MB |
