An adjustable GPU support that can be set to between 58mm minimum and 100mm maximum height.
There are two types of heads. One flat head for most use cases, and one rounder head that can be used to fit better on hollow or mesh-like bodies. You need to print only one of the heads.
Parts can be printed without supports.
| GPU_Support_Body.stl | 14.0MB | |
| GPU_Support_Flat_Head.stl | 4.5MB | |
| GPU_Support_Round_Head.stl | 4.5MB | |
| GPU_Support_Shaft.stl | 4.4MB |
