Adjustable Footrest 3D Printer Model
The file 'Adjustable Footrest 3D Printer Model' is (pdf,stl) file type, size is 1.3MB.
The file 'Adjustable Footrest 3D Printer Model' is (pdf,stl) file type, size is 1.3MB.
Since I have been working a lot at home due to Covid situation, I decided to design and print my own footrest. It has two different inclinations and also the possibility to change the height.
All models were printed with layer 0,2 mm and 20% infill. The exception were te files "grabs" and "pins" which I set 100% infill for higher stiffness. Everything was made with ABS, but should works with PLA too.
The parts were designed to assemble through fitting. Screws, glue, etc, are not necessary. A PDF file with the assembly procedure is available.
You probably could buy something better in the market, but it wouldn't be 3D printed by yourself :)
| Assembly_guide_adjustable_footrest_2020_09_17.pdf | 666.5KB | |
| foot_10_double.stl | 18.4KB | |
| foot_10_single.stl | 8.6KB | |
| foot_20_double.stl | 18.4KB | |
| foot_20_single.stl | 8.8KB | |
| grabs.stl | 232.9KB | |
| pins.stl | 46.8KB | |
| plate_l_d.stl | 575.5KB | |
| plate_l_u.stl | 574.5KB | |
| plate_r_d.stl | 556.7KB | |
| plate_r_u.stl | 593.2KB | |
| side_support_l.stl | 202.4KB | |
| side_support_r.stl | 202.4KB |
