Adjustable Filament Reel Roller 3D Printer Model
The file 'Adjustable Filament Reel Roller 3D Printer Model' is (skp,stl) file type, size is 2.5MB.
The file 'Adjustable Filament Reel Roller 3D Printer Model' is (skp,stl) file type, size is 2.5MB.
Ok up to Mk3 now beefed up some areas and added some under hang to allow easier removal from bed, I broke one of the last ones getting it off.
Updated with Mk2 versions. set the A version with pass through holes and B with thread taking holes. Recessed the bearing screw as it is hard to adjust the length screw past it. It will need 12mm screws now.
adjustable filament reel roller. I have a number of different makes of filament and all seem to be different sizes so I needed an adjustable roller for them.
Screws are M4 X 40mm the bearings are 4 x 10 x 4 with M4 washers about 1mm thick and held in with M4 X 16mm allen bolts.
| filament_roller2.skp | 1.7MB | |
| filament_rollerA.stl | 166.8KB | |
| filament_rollerB.stl | 166.8KB | |
| filament_rollerMk2.skp | 2.3MB | |
| filament_rollerMk3.skp | 2.8MB | |
| RollerMk2_A.stl | 178.0KB | |
| RollerMk2_B.stl | 187.0KB | |
| RollerMk3_A.stl | 147.0KB | |
| RollerMk3_B.stl | 150.9KB |
