Adjustable Can Dispenser (requires 300mm Bed) 3D Printer Model
The file 'Adjustable Can Dispenser (requires 300mm Bed) 3D Printer Model' is (stl) file type, size is 857.6KB.
The file 'Adjustable Can Dispenser (requires 300mm Bed) 3D Printer Model' is (stl) file type, size is 857.6KB.
Adjustable version of the ljhtom beer/soda can dispenser. Uses threaded connectors to allow adjustment to different can heights.
Should work with ~110mm to ~160mm tall cans.
This version requires ~300mm bed.
Print both halves and 4 connectors.
You may or may not need a brim for connectors depending on your bed adhesion.
To assemble, screw connectors into both dispenser halves simultaneously. Be sure connector is oriented correctly (threads are reversed for each half).
If connectors are too snug or loose, you can scale the x and y slightly to compensate but be sure NOT to scale in z direction so thread pitch does not change. I suggest printing a test connector (or partial) first to check fit.
See original design for more notes:
https://www.thingiverse.com/thing:4923778
A version for smaller printers is available here:
https://www.thingiverse.com/thing:4964986
Threaded connector for taller cans up to 170mm:
https://www.thingiverse.com/thing:5087074
| Dispenser_full_left_thread.stl | 1.4MB | |
| Dispenser_full_right_thread.stl | 507.1KB | |
| threaded_connector_70mm.stl | 242.0KB |
![Molle Soda Can Holder [Update 1] 3D Printer Model](https://res.3axis.co/7d5593e0-9f12-4945-92bc-68fbc2f5714d/images/4621e12c-d668-4894-957a-01da9c208f5f_thumb.jpg)