Adjustable Belt Tensioner/Tightener And Belt Tie (Tevo Tarantula) 3D Printer Model
The file 'Adjustable Belt Tensioner/Tightener And Belt Tie (Tevo Tarantula) 3D Printer Model' is (skp,stl,f3d) file type, size is 554.2KB.
The file 'Adjustable Belt Tensioner/Tightener And Belt Tie (Tevo Tarantula) 3D Printer Model' is (skp,stl,f3d) file type, size is 554.2KB.
Update 11/5/18: Added 1.5mm base to the thick version.
Update 11/4/18: Added a thick version (+2mm thickness).
Update 3/11/17 : New hole, added fillet.
Update 10/23/16 : increased thickness for screw holder and legs.
A simple, adjustable belt tensioner + a belt tie to replace the cable tie.
The tensioner requires an M3 screw. The screw hole is tight-fit and should provide more than enough tension to hold the screw. Designed to be printed at 100% scale.
Use higher wall line count (shells) & high infill for maximum strength.
The calibration cube in 3rd photo was printed @0.1mm layer height with properly tensioned belts and a Dual Z mod https://www.thingiverse.com/thing:2163949
sketchup/fusion360 file is attached in case adjustment is needed.
| belt_tie.skp | 1.1MB | |
| belt_tie.stl | 16.5KB | |
| tensioner.f3d | 132.9KB | |
| tensioner_big_2.7mm_standard.stl | 50.5KB | |
| tensioner_big_2.8mm.stl | 50.7KB | |
| tensioner_small_part.stl | 86.7KB | |
| THICK_tensioner.stl | 51.7KB |
![[V8.0] One/Two-Up Extruder With Lever And Adjustable Tension (E3D Support!) 3D Printer Model](https://res.3axis.co/ee4c5817-b473-4259-bcbf-002fb7e94e09/images/0be1ff5d-45da-4031-8164-056678bbe2df_thumb.jpg)
