ADIMLab Y-Axis Carriage Support 3D Printer Model
The file 'ADIMLab Y-Axis Carriage Support 3D Printer Model' is (stl) file type, size is 410.8KB.
The file 'ADIMLab Y-Axis Carriage Support 3D Printer Model' is (stl) file type, size is 410.8KB.
Machine tolerances may vary 1-2mm
holes may be tighter/looser depending on assembly
May still use eccentric nuts on the two center v-slot wheels.
This part keeps the heatbed SOLID! and helps prevent the need to constantly adjust and tighten the 6 M5 bolts at the bottom of the heatbed carriage. It will help keep the v-slot wheels perpendicular to the heatbed carriage 2020 rails and prevent them bending outwards which results in a loosened bed. It can also help to evenly wear the v-slot wheels instead of only a select few wearing down independently which could slowly throw off the print.
Specs:
Requires:
Material: PLA
Layer Height: 0.1mm
Infill: 50%-100%
| ADIMLab_Y_Axis_Carriage_Standoff_SpacerM5x8mm.stl | 618.4KB | |
| ADIMLab_Y_Axis_Carriage_Support_V2.stl | 582.7KB | |
| ADIMLab_Y_Axis_Carriage_Support_V3.stl | 471.3KB |
