Adhesive Hook Rack 3D Printer Model
The file 'Adhesive Hook Rack 3D Printer Model' is (f3d,stl) file type, size is 106.1KB.
The file 'Adhesive Hook Rack 3D Printer Model' is (f3d,stl) file type, size is 106.1KB.
Clothing hooks mounted with double-sided adhesive tape.
Ideally, the tape should not be foam backed, otherwise the hooks may bend inwards. I recommend using a double-sided armoured tape e.g., Bison MontageKit Extreme Grip tape or similar.
I intentionally designed the hooks to be separable, allowing them to be printed on their side for added strength. In the file hooks_for_print.stl, the components are arranged exactly as I printed them.
Printing all the hooks vertically at once would make them weaker, as it increases the risk of inter-layer separation under load.
The faceplate connects all the hooks and serves as both a platform for the adhesive tape and a decorative cover.
Additionally, the hooks can be glued to the faceplate in advance using a hot glue gun before attaching the whole assembly to the wall.
| hooks.f3d | 81.0KB | |
| hooks.stl | 72.6KB | |
| hooks_for_print.stl | 72.6KB |
