Adapter For Tenlog Power Supply 3D Printer Model
The file 'Adapter For Tenlog Power Supply 3D Printer Model' is (stl) file type, size is 274.2KB.
The file 'Adapter For Tenlog Power Supply 3D Printer Model' is (stl) file type, size is 274.2KB.
I wanted to swap my original 360W Tenlog TL-D3 Pro power supply for a 600W power supply, but I quickly realized that the mounting points didn't fit. The original Tenlog power supply is half as flat as my new power supply.
So I simply created "adapters" and was then able to screw the new power supply onto the old mounting points.
M4 screws are used, I used the ones with a round head and a hexagon socket. the original screws on the outside.
You may want to screw the screws into the printed parts before installation as they go in a bit tight.
There is a large and small version, I actually only created the small one to test whether the holes fit, I left it installed straight away
| Tenlog_600W_Power_Adapter.stl | 396.8KB | |
| Tenlog_600W_Power_Adapter_maxi.stl | 559.7KB |
