3d printed adapter between a stereo microscope and a monitor mount arm.
Enable a flexible and long reach (70CM) movement of the microscope above the table (and the arm coset just 80$ and not 350 $ or more).
there are two types of adapters :
one for side sliding of the adapter to the arm and the second one is for upper sliding of the adapter to the mount.
The upper one is preferred
my microscope weight is~3 KG this arm is good for 8 KG
the adapter connect to the 20 mm shaft that came with the microscope
I have printed it with ABS
And 50% infill
It feels good and sturdy but I'll know better after I'll work with it for a while.
Please leave comments
the arm that I used is SIH model Mo1 :
http://www.sih.co.il/en/solutions/wallmounts/monitors/mo1
Thanks
microscope_holder_-Side_sliding_-_V2_8.2.2018.STL | 12.3MB | |
microscope_holder_-_Upper_sliding_-_V2_right_8.2.2018.STL | 15.2MB |