Adapter For Impact Head Sprinkler 3D Printer Model
The file 'Adapter For Impact Head Sprinkler 3D Printer Model' is (stl) file type, size is 1.5KB.
The file 'Adapter For Impact Head Sprinkler 3D Printer Model' is (stl) file type, size is 1.5KB.
Telescopic sprinklers are expensive, as much as 8x the cost of a zinc Impact sprinkler which can be had for less than $5 each. This adapter accepts the spike end of a common impact sprinkler which can be secured in the jaws of the vice.
The anchor end can be attached to the top of a stick. In my case I have found that a furring strip, 8 ft long, which can be bought at US hardware stores for about $2-3 is the perfect width. I have sawed these to about 6 ft long, pounded them into the ground, and a single impact sprinkler can now cover my entire backyard.
| Sprinkler_adapter_v1.stl | 7.1KB |
![[8 Ft.] Popup Spray Sprinkler Nozzle Replacement 3D Printer Model](https://cdn.3axis.co/assets/12/cc/68/3e/12cc683e-b26b-46e9-b1d8-a8b40dfadc0b/images/39dfe449-f40c-4746-9598-e358260f09be_thumb.jpg)
