This allows easy connection to Black&Decker Lithium Ion batteries like the LBXR20 and the LB2X4020. It has holes for mounting a circuit board and also mounting the adapter to something else.
Parts:
Crimp lugs for battery interface:
Male uninsulated Quick Disconnect, 0.25" (0.81mm thick, 6.35 mm wide)
Molex P/N 19022-0018 Mouser P/N 538-19022-0018
Epoxy: thick (viscous) long set time (more than 5 minutes) like JB Weld.
Use the battery to hold the lugs in place while applying the epoxy.
Be careful not to short the wires.
Note: Unfortunately, 20V is too high for a lot of electronics that uses 12V.
| battery_2.stl |
