Adapter Bracket For 2023 Rav4 Prime Mirror Folding Switch 3D Printer Model
The file 'Adapter Bracket For 2023 Rav4 Prime Mirror Folding Switch 3D Printer Model' is (stl) file type, size is 512.0B.
The file 'Adapter Bracket For 2023 Rav4 Prime Mirror Folding Switch 3D Printer Model' is (stl) file type, size is 512.0B.
This adapter has a very specific application. I made these for the 2023 Toyota RAV4 Prime SE and they are needed for the power folding mirrors from CarTrimHome. The STL file includes one but you will need to print two of them.
The power folding buttons provided from CarTrimHome (at the time I made these adapters) do not fit with the Rav4 Prime's mirror switch assembly. The button assembly sits too low and does not clip into place (it rocks back and forth and sits on a noticeable angle, and is unusable). I made this adapter to have the switch sit at the correct height and be able to accommodate the button assembly.
NOTE: the skinny pieces (chairback, if the shape is a "chair") were a little bit too tall, so I had to sand them down just enough to get it flush with the sides of the OEM switch assembly. You'll need to do this or the buttons will sit too high. See my pictures for the final result.
| 2023_Rav4_Prime_mirror_fold_switch_bracket.stl | 1.4KB |
