Adapter – 1″ Poly Pipe To 3/4″ PVC Pipe 3D Printer Model
The file 'Adapter – 1″ Poly Pipe To 3/4″ PVC Pipe 3D Printer Model' is (stl,3mf) file type, size is 537.2KB.
The file 'Adapter – 1″ Poly Pipe To 3/4″ PVC Pipe 3D Printer Model' is (stl,3mf) file type, size is 537.2KB.
My garden has 3/4" PVC pipes with holes drilled in them for irrigation. I have now run 1" black poly 100psi pipe out to the garden (300+ feet). Eventually, I'll just use black poly in the garden, too, but for now, I needed this adapter to get from 1" poly to 3/4" pvc pipe.
NOTE: I printed mine in ABS, worked great at 102% scale due to ABS shrinkage. I will say, however, that the PVC pipe was installed while the part was still hot, otherwise it wouldn't have gone in well. So I would scale to at least 103% next time and try that. The black poly pipe went over the smaller end with no problems at all. I used a hose clamp on the black poly pipe. I'll add some photos when it's not raining outside.
| Adapter_One_Inch_Poly_Pipe_to_PVC_v1__stl.stl | 286.4KB | |
| Adapter_One_Inch_Poly_Pipe_to_PVC_v1___3mf.3mf | 465.5KB |
