This is a handy pad for the Adafruit Crickit. It's used to protect the bottom of the Crickit to avoid shorting the electrical contacts due to the contacts being exposed. This is a very easy quick print. I used 2.5 mm nylon screws and standoffs. You can use that or 3mm. I used nylon since its an insulator. I used different materials in printing the pad. I 3d printed it PETG (lighter green_FFCP), NYLON (black_UM3) and NinjaFlex(red_UM2+), see above pictures. All materials seem to have kept the same tolerances. The dark green is cut by a Glowforge Laser Pro cutter. The .svg file is attached. note: the triangle top point printed on the pad goes to the side with power.
| crickit.stl | 139.7KB | |
| crickit.svg | 10.1KB |
