Adafruit 128×64 OLED Bonnet Pi Zero Case 3D Printer Model
The file 'Adafruit 128×64 OLED Bonnet Pi Zero Case 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Adafruit 128×64 OLED Bonnet Pi Zero Case 3D Printer Model' is (stl) file type, size is 2.2MB.
Case for Adafruit 128x64 OLED Bonnet for Raspberry Pi on Pi Zero.
There are versions that use 2.5mm threaded inserts and with modelled threads.
In addition there are models that can attach 12mm x 2mm or smaller magnets so the case can be mounted on magnetically permeable surfaces.
Uses 4 x 2.5mm x 5mm screws.
| Button.stl | 117.8KB | |
| Case_Bottom_-_Magnet_Modelled_Thread.stl | 2.0MB | |
| Case_Bottom_-_Magnet_Threaded_insert.stl | 1.1MB | |
| Case_Bottom_-_Modelled_Thread.stl | 1.9MB | |
| Case_Bottom_-_Threaded_insert.stl | 1.1MB | |
| Case_Top.stl | 254.3KB |
