This is a monopod designed for the Accuracy International Chassis (AICS) 1.5 and Accuracy International rifle.
You need:
1x M6x40 Allen bolt
1x M6x60 Allen bolt
1x M10x40 all-thread Allen bolt
1x M5 bolt (or 5mm rod) to be cut 45mm long
Installation:
Make a 5mm hole in the center of the M10x40 Allen head.
Insert the bolt head in the bolt rotation point and use the 5mm rod or the cut 5mm bolt to secure it in place.
Remove the stock bolt and replace it with the M6x40.
Secure the monopod with the M6x60.
Print 2 rings, one is designed to keep the screw in place, the other for the knob.
Printed in PETG. PC/ABS can work too. I highly recommend NOT using PLA or PLA+.
I have a .308 Remington 700 AICS.
I HAVEN'T TESTED IT YET. WILL UPDATE THIS.
I don't take any responsibility if this project will damage your rifle or people.
Guns are not a toy.
I used OrcaSlicer, printed on a ELEGOO Neptune 4 Pro.
Printing Details:
Material: PETG
Layer Height: 0.2mm
Infill: 50%
| Fixed_Part.STL | 199.8KB | |
| Knob_M10.STL | 1.7MB | |
| Ring_M10.STL | 253.9KB |
![Orde’s Sanok [ver. Iylv] 3D Printer Model](https://cdn.3axis.co/assets/4c/fc/43/7b/4cfc437b-2c0c-433b-ae65-a1808a94b264/images/4dede404-bcd4-4bb3-9ec9-9dda5dd9af4b_thumb.jpg)
