I designed this rocket to start working on the spiralized printing technique. I get much better surface finish with this and lighter rockets. This worked beautifully and the result is a very high performance rocket that will soar to extreme altitude with 18mm estes motors. I used rocksim to review my design and test the heights the rocket would soar to. I highly recomend this software to anyone wanting to design their own rockets. Very easy to use and to date very accurate to predict performance.
I have included GCode files for those who have a Anet A8. I used Cura to slice it. I have printed (3) of these to date and these files work nicely for Inland PETG.
| 19.5mm_x_200mm_Tube.gcode | 2.9MB | |
| 19.5mm_x_200mm_Tube.STL | 14.1KB | |
| 19.5mm_x_75mm-NC.gcode | 4.2MB | |
| 19.5mm_x_75mm-NC.STL | 875.5KB | |
| Coupler.gcode | 427.6KB | |
| Coupler.SLDPRT | 70.0KB | |
| Coupler.STL | 14.1KB | |
| Motor-Stop.gcode | 1.3MB | |
| Motor-Stop.STL | 28.2KB | |
| Stage-Booster-SP.gcode | 2.3MB | |
| Stage-Booster-SP.STL | 480.3KB | |
| Stage-Booster.STL | 947.0KB | |
| Stage-Fin_Can-SP.gcode | 3.9MB | |
| Stage-Fin_Can-SP.STL | 468.1KB | |
| Stage-Fin_Can.STL | 2.4MB |
