AA and AAA Battery Racks
This is a pair of 36 cell (6 X 6) battery racks, one each for AA and AAA cells.
All edges are radiused. Tops of holes are chamfered.
There are embedded labels on one side of each indicating size and "Ni-MN". These are integral to the models but could be covered if not accurate for other's use.
Material: PLA
Layers: 0.225 mm
Shells: 0.8 mm
Infill: 16%
| AAA_Ni-MH_Rack_rev_0.stl | 332.6KB | |
| AA_Ni-MH_Rack_rev_0.stl | 334.3KB |
