I designed this model without the originals dimensions and created each part based off mere visuals and whatever worked most efficiently towards looking and manoeuvring like the A24 Ultra. I designed the custom engraved board model after having created two AtomStack designs engraved boards already, deciding it would much cooler if I also gave others the ability to include designs of their own. The custom board I created with OpenSCAD to enable customisation through Thingiverse and the rest, including the A24 model, was created using SolidWorks 2023.
| AtomStack-Assembly.SLDASM | 598.5KB | |
| AtomStack-BaseFinal.STL | 50.6KB | |
| AtomStack-BaseTabFinal.STL | 1.8KB | |
| AtomStack-BaseTabSliderFinal.STL | 2.8KB | |
| AtomStack-Enclosure-Tab.STL | 15.7KB | |
| AtomStack-Enclosure-TabCorner.STL | 16.1KB | |
| AtomStack-Enclosure-TabCorner2.STL | 16.1KB | |
| AtomStack-Enclosure-Tabside.STL | 15.9KB | |
| AtomStack-Enclosure-TabTop.STL | 15.9KB | |
| AtomStack-EnclosureCamFinal.STL | 23.2KB | |
| AtomStack-EnclosureFinal.STL | 213.1KB | |
| AtomStack-EnclosureHingeFinal.STL | 524.7KB | |
| AtomStack-EnclosureLidFinal.STL | 47.1KB | |
| AtomStack-EnclosureLidHandleFinal.STL | 1.4KB | |
| AtomStack-EnclosureLidTab.STL | 67.6KB | |
| AtomStack-EnclosureLidTab2.STL | 22.9KB | |
| AtomStack-EnclosureTabsFinal.STL | 4.2KB | |
| AtomStack-LaserModuleFinal.STL | 319.5KB | |
| AtomStack-LaserRigFinal.STL | 3.2KB | |
| AtomStack-LaserRigModuleEnd.STL | 20.2KB | |
| AtomStack-RigCoverFinal.STL | 39.7KB | |
| AtomStack-WoodEngraving.STL | 87.5KB | |
| AtomStack-WoodEngraving2.STL | 143.0KB | |
| Customisable-BoardEngraving.scad | 2.7KB |
