A1U 3inch Riser 3D Printer Model
The file 'A1U 3inch Riser 3D Printer Model' is (stl) file type, size is 3.4KB.
The file 'A1U 3inch Riser 3D Printer Model' is (stl) file type, size is 3.4KB.
I wanted a riser for my A1U cabinet so I didn't need a stool to play comfortably, I found risers for bed frames online but they were not a tight fit and would fall off when moving the cabinet. I printed at low quality and at 15% infill and still took about 1kg of filament and 2 days to print all 4 needed. I tested the strength and it can hold a 165 lb man on one block with no issue so i'm guessing you can use less infill to save time and filament. As long as you have a typical A1U cabinet with a properly built riser, these blocks will press fit tightly without any modification and without any damage to your existing riser. These will rise your A1U cabinet to the height of a standard arcade cabinet. "You must have an existing riser on your A1U cabinet to use these, they will not replace the need for the manufactured riser."
| A1U_3inch.stl | 13.5KB |
