If you use it, please consider buying me a coffe https://buymeacoffee.com/larsivarha3 :)
Modified back trap door with slots for MicroHDMI/HDMI and RJ45.
Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension)
If you use the HDMI version, you must screw on the top screw after the trap door is put in place.
You could also take a look at this HDMI version:
https://www.thingiverse.com/thing:4593132
Recommended (micro)hdmi cable lenght is 20 cm.
Screws: Two M2x5mm for the HDMI, One M2x10mm for the ENC28J60 Ethernet Module LAN
Get some flat ribbon cable for the network module, and remove the top at one end or else it will be touching the floppy drive. See pictures for description.
https://www.ebay.com/itm/10pcs-10pin-2-54mm-IDC-Flat-Ribbon-Cable-Wire-for-Atmel-AVR-ISP-JTAG-DownNWUSHH/303636924114?hash=item46b22bc6d2:g:DEwAAOSwfLxbEfQf
Used on Amiga 1200 with a Vampire 1200 accelerator.
Use it together with my other designs to hold the sd card extender:
https://www.thingiverse.com/thing:4563129
or
https://www.thingiverse.com/thing:4578398
A version without the microsd slot is here:
https://www.thingiverse.com/thing:4557964
| A1200_BackTrapDoor_HDMI_MicroSD_and_RJ45.stl | 52.8KB | |
| A1200_BackTrapDoor_MicroHDMI_MicroSD_and_RJ45.stl | 40.1KB |
![[DIY] Monitor Steuerungs Kasten Für Alte Laptop Screens 3D Printer Model](https://res.3axis.co/21ee3416-455b-454f-b78f-4446c74df204/images/69c27c2a-8e3e-497c-97bf-92b92027d5a1_thumb.jpg)
