A10M, A10, A10D And Similar Eletcronics Fan Cover 3D Printer Model
The file 'A10M, A10, A10D And Similar Eletcronics Fan Cover 3D Printer Model' is (stl) file type, size is 30.9KB.
The file 'A10M, A10, A10D And Similar Eletcronics Fan Cover 3D Printer Model' is (stl) file type, size is 30.9KB.
The stock cover and fan on the A10M is VERY loud and existing A10 covers are too big for the improved bed levelling dials on the A10M.
So i decided to try and design a cover that vents it to the side.
This is my latest design the prev one worked but i have now put in an overhang on the vent as where the head parked drips could still accumulate and fall into the electronics box.
Its designed to take the standard 40mm fan out of the existing metal lid and re use it within this. I used Self Tapping screws to secure fan to cover. The existing screws for the metal cover can be reused.
It quietens the fan down significantly and the vent facing the side moves the sounds away from the front.
UPDATE. after printing i had to move a hole 0.3mm and changed the inside to a simpler config for faster printing.
| A10M_Electrics_box_with_Fan_Cover_2.stl | 138.6KB |
