These washers are to use with nails that you want to have a larger head. Good for mounting things to the wall or acting as a spacer.
** added thicker 2mm washers
Dimensions:
1cm washers:
Diameter: 1 cm
Nail hole diameter: 2 mm
Nail hole chamfer: .5 mm
1.5cm washers:
Diameter: 1.5 cm
Nail hole diameter: 2 mm
Nail hole chamfer: .5 mm
Print Settings:
I used PLA but ABS filament would be more durable.
Infill: Because this part is so thin, infill percentage and pattern shouldn't affect the print if the same top/bottom settings are used.
Top/bottom: 0.8 mm thickness, 4 layers
Walls: 0.8mm thick, 2 layers
Adhesion: Heated bed, 3mm Raft
| Finish_nail_Washer_1.5cm.stl | 6.9KB | |
| Finish_nail_Washer_1.5cm_thick_x6.3mf | 10.6KB | |
| Finish_nail_washer_1.5cm_x6.stl | 41.1KB | |
| Finish_nail_Washer_1cm.stl | 6.9KB | |
| Finish_nail_Washer_1cm_thick_x6.3mf | 10.4KB | |
| Finish_nail_Washer_1cm_x6.stl | 41.1KB |
