A simple box with optional rounded edges to be clamped at the side of an ikea 'lack' table.
With adjusted height useable for other tables, boards, desks and elsewhere, where ist simply fits.
The clamp is slightly angled, so it works with PLA for light loads, but PETG is propably better.
To be printable without support, one side is printed extra to be glued on. And this version has two round print helpers, to be stripped after printing.
If using two prints of halved length (uploaded are two 80mm parts), and one part mirrored, these two parts can be placed adjacent to get a box without gluing.
And for my 5 port ethernet switch optional holes are added, so the heat can dissipate and the power connector can be connected.
have fun.
| bn-lack-side-box-110mm-mini-switch.stl |
| bn-lack-side-box-120mm.stl |
| bn-lack-side-box-160mm.stl |
| bn-lack-side-box-60mm.stl |
| bn-lack-side-box-80mm-left.stl |
| bn-lack-side-box-80mm-right.stl |
| bn-lack-side-box-high.stl |
| bn-lack-side-box.scad |
| bn-lack-side-slot-60mm.stl |
| bn-lack-side-slot-high.stl |
| bn-linmon-side-box-60mm.stl |
