A SHARK 3D Printer Model
The file 'A SHARK 3D Printer Model' is (stl) file type, size is 17.6MB.
The file 'A SHARK 3D Printer Model' is (stl) file type, size is 17.6MB.
[ A SHARK (Mechanical Toy) ]
Printable Shark Automaton
Assembly is required.
Assemble instruction is in my youtube channel
https://youtu.be/fEVepdNuris
Additional Motor Parts
https://www.thingiverse.com/thing:4585152
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Lubricating moving and rolling parts with silicone grease is recommended.
[Layer height]
0.10mm : Crank_01,02, Crank pin_01, 02, Gear_01,02, Gear_AxleRing_01,02, WarmGear_AxleRing_01,02, Head_03, Head_04.stl
0.18mm : All the Rest
[Shell count]
3
[Fill density]
100% : Head_01.stl
15%~20% : All the Rest
[Time to do]
about 600 - 700 minutes
[Technology]
FDM
[Material]
PLA or ABS
[Dimensions]
about 225mm x 130mm x 100mm
[Material Quantity]
about 110g
| Body_01.stl | 7.5MB | |
| Body_02.stl | 7.2MB | |
| Body_03.stl | 5.8MB | |
| Body_Connecting_rod.stl | 1.5MB | |
| Body_Gear_Axle.stl | 31.9KB | |
| Crank_01.stl | 1.2MB | |
| Crank_02.stl | 405.7KB | |
| Crank_03.stl | 416.7KB | |
| Crank_04.stl | 232.1KB | |
| Crank_pin_01.stl | 465.7KB | |
| Crank_pin_02.stl | 17.1KB | |
| Fin_Left.stl | 14.8KB | |
| Fin_Right.stl | 15.5KB | |
| GearBox_01.stl | 4.1MB | |
| GearBox_02.stl | 1.4MB | |
| GearBox_03.stl | 1.8MB | |
| GearBox_04.stl | 1.8MB | |
| GearBox_05.stl | 2.0MB | |
| GearBox_06.stl | 1.3MB | |
| Gear_01.stl | 3.1MB | |
| Gear_02.stl | 2.4MB | |
| Gear_AxleRing_01.stl | 999.4KB | |
| Gear_AxleRing_02.stl | 986.1KB | |
| Handle.stl | 2.4MB | |
| Head_01.stl | 1.3MB | |
| Head_02.stl | 1.2MB | |
| Head_03.stl | 1.2MB | |
| Head_04.stl | 396.0KB | |
| Head_Connecting_rod.stl | 137.2KB | |
| Tail_01.stl | 5.4MB | |
| Tail_02.stl | 1.4MB | |
| WarmGear_Axle.stl | 29.6KB | |
| WarmGear_AxleRing_01.stl | 1.2MB | |
| WarmGear_AxleRing_02.stl | 1.1MB |
