A-Paul-O Pod. Wood Leg Mod For TC40 Tripod 3D Printer Model
The file 'A-Paul-O Pod. Wood Leg Mod For TC40 Tripod 3D Printer Model' is (stl,x_t) file type, size is 3.3MB.
The file 'A-Paul-O Pod. Wood Leg Mod For TC40 Tripod 3D Printer Model' is (stl,x_t) file type, size is 3.3MB.
Start with a ZWO TC40 tripod. Get some 1-3/8" dowels, 3D print some parts, and now you have a tripod with wooden legs.
Full directions are here:
https://www.cloudynights.com/topic/938467-the-a-paul-o-pod-a-diy-wooden-tripod-that%E2%80%99s-cheap-and-easy-to-make/
The .stl files are ready to print. The .x_t files are parasolid files if you want to modify them. The source CAD document is here:
https://cad.onshape.com/documents/f9024bd26a398c37834f2a56/w/0c99ed96a196f5deb316c5d6/e/a51e75249ebc3c0207447944?configuration=List_NgQGm49ZNN45TL%3DD&renderMode=0&uiState=66f45ad781372b499206620f
| TC40_Parts_-_Foot.stl | 1.4MB | |
| TC40_Parts_-_Foot.x_t | 959.3KB | |
| TC40_Parts_-_Lock_1.x_t | 41.9KB | |
| TC40_Parts_-_Lock_2.x_t | 42.6KB | |
| TC40_Parts_-_Lock_3.x_t | 42.8KB | |
| TC40_Parts_-_Lock_4.x_t | 42.9KB | |
| TC40_Parts_-_Lock_Set.stl | 538.1KB | |
| TC40_Parts_-_Lock_Set.x_t | 220.7KB | |
| TC40_Parts_-_Lock_Single.stl | 120.2KB | |
| TC40_Parts_-_Multicolor_Printer_Only.stl | 1.2MB | |
| TC40_Parts_-_Multicolor_Printer_Only.x_t | 1.0MB | |
| TC40_Parts_-_Surface_2.x_t | 20.7KB | |
| TC40_Parts_-_Surface_3.x_t | 4.6KB | |
| TC40_Parts_-_Tensioner_Placer.stl | 2.1MB | |
| TC40_Parts_-_Tensioner_Placer.x_t | 173.8KB | |
| TC40_Parts_-_Tensioner_Placer_Ring.stl | 56.5KB | |
| TC40_Parts_-_Tensioner_Placer_Ring.x_t | 7.8KB | |
| TC40_Parts_-_Top_Cap.stl | 151.8KB | |
| TC40_Parts_-_Top_Cap.x_t | 32.5KB |
