A Motorized Shark 3D Printer Model
The file 'A Motorized Shark 3D Printer Model' is (stl) file type, size is 3.6MB.
The file 'A Motorized Shark 3D Printer Model' is (stl) file type, size is 3.6MB.
Printable Motorized Shark Mechanical Toy
Assembly is required.
Assemble instruction is in my youtube channel
https://youtu.be/I4kt3q0YJZ0
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Require small 5V DC motor and electric components such as electric wires.
*Lubricating moving and rolling parts with silicone grease is recommended.
| Cover.stl | 1.9MB | |
| GearBox.stl | 5.4MB | |
| Gear_01.stl | 2.3MB | |
| Gear_02.stl | 7.7MB | |
| Gear_03.stl | 538.2KB | |
| Pin_01.stl | 1.1MB | |
| Pin_02.stl | 29.6KB | |
| Pin_03.stl | 73.5KB |
