A Minimalist Case For The WB2CBA DX-UnO Digital Radio 3D Printer Model
The file 'A Minimalist Case For The WB2CBA DX-UnO Digital Radio 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'A Minimalist Case For The WB2CBA DX-UnO Digital Radio 3D Printer Model' is (stl) file type, size is 1.0MB.
This is a minimalist case for the DX UnO digital radio project by WB2CBA.
It is just a simple top and bottom plate with standoff spacers.
The standoff spacer are threaded with m3 threads.
An m3 tap is useful for cleaning these threads before assembly.
Eight m3 screws hold everything together (4x m3x10mm and 4x m3x12mm)
More info on the DX UnO project can be found here: https://github.com/BluQRP/DX_UnO
| base.stl | 739.3KB | |
| standoff.stl | 920.7KB | |
| standoff2.stl | 924.8KB | |
| top.stl | 680.2KB |
