This optimal version for 9mm blades with support 2xM2 bolts,nuts,shim (standart 4mm length). Also you need ~11mm length M3 bolt+2nuts. I cut off from the big one.
The author is not responsible for failed copies or damage. Everything must be done very strong as you can. ~ 95-100% infill. Please, be careful and not rush.
Supports: only for M2 bolts heads places.
Two body parts connected with a specific glue (I used dichlorethane).
| KDS_Knife_9mm_1_hidden_bolts.stl | 532.2KB | |
| KDS_Knife_9mm_2_hidden_bolts.stl | 428.3KB | |
| KDS_Knife_hand_9mm_R3.22_petg.stl | 357.8KB | |
| KDS_Knife_hand_9mm_R3.25_abs.stl | 366.7KB | |
| KDS_Knife_nut_holder_9mm_R3.22_petg.stl | 10.8KB | |
| KDS_Knife_nut_holder_9mm_R3.25_abs.stl | 10.8KB | |
| KDS_Knife_ring_9mm.stl | 436.0KB |
