9in – Porter Cable Band Saw Straight Edge Guide / Fence 3D Printer Model
The file '9in – Porter Cable Band Saw Straight Edge Guide / Fence 3D Printer Model' is (stl) file type, size is 3.7MB.
The file '9in – Porter Cable Band Saw Straight Edge Guide / Fence 3D Printer Model' is (stl) file type, size is 3.7MB.
A 3D printable straight edge band saw guide for a 9in Porter Cable Band Saw.
(Might work with other brands)
All parts should be oriented correctly for printing. I suggest using 15-20% infill with 1.2mm top/bottom and walls.
The Connector Shaft will need to be printed with support.
The Main Shaft Bolt may need a little deburring to turn smoothly in the unthreaded guide.
The Connector Shaft will need to be glued/epoxied to the Main Shaft Bolt.
| CONNECTOR_SHAFT.stl | 98.4KB | |
| GUIDE_SIDE_1_NO_THREADS.stl | 103.4KB | |
| GUIDE_SIDE_2_THREADED.stl | 3.7MB | |
| KNOB.stl | 3.6MB | |
| MAIN_BOLT_SHAFT.stl | 2.0MB |
