intake tube with an IAT port for the early 944 (na, can also be used on later 924s)
additional tools required:
there are 2 different print options:
once printed, you'll need to tap the 4 holes on the base for the m6 bolts coming from the air box; and tap the larger IAT hole on the tube itself for 3/8 NPT. if you opted to print the base separate from the tube, glue them together by slotting the tube end with the short/narrow end into the recess on the base. let it dry/cure and you should be good to go! depending on the filament and infill, it may be worth sealing the entire exterior to prevent air leaks.
| 944na_IAT_intake_tube.stl | 218.3KB | |
| 944na_IAT_intake_tube_base.stl | 1.2MB | |
| 944na_IAT_intake_tube_complete.stl | 1.4MB |
