92.5mm T-adapter For Player One Camera And F/6.3 Focal Reducer On Nexstar 8SE 3D Printer Model
The file '92.5mm T-adapter For Player One Camera And F/6.3 Focal Reducer On Nexstar 8SE 3D Printer Model' is (stl) file type, size is 399.5KB.
The file '92.5mm T-adapter For Player One Camera And F/6.3 Focal Reducer On Nexstar 8SE 3D Printer Model' is (stl) file type, size is 399.5KB.
Thank you to nebarnix for the original design. I have adapted it to cater for the different backfocus setting for a Player One Uranus-C camera on a Nexstar 8SE with a f/6.3 focal reducer. The total backfocus there is still 105mm and the distance from the sensor in the camera to the beginning of the thread is 12.5mm. Use adaptive layers to print faster where the precision is not needed and finer where the thread is = shortens the print time while still maintaining quality where needed.
| 92.5mm_T_adapter.stl | 1.1MB |
