EVERYONE:
THERE IS A PROBLEM WITH THE "DOWNLOAD ALL FILES" OPTION. You can still download all individual files successfully. I apologize for the inconvenience and have no idea how this functionality broke. I'll see what I can do but in the meantime you can still download what you need.
This is a simplified dummy radial for models that require either a 9 or 18 cylinder radial. I do expect to release a version in the future with "full" cylinders, but this method keeps the printing and assembly simple and still looks great.
There are STLs for 2 sizes included. 140mm diameter and 400mm diameter. My best guess is that the 140mm version should fit the Flite Test master series P-47 and F4U Corsair models, but I have not confirmed this yet.
Parts required to finish:
18 pushrods (I used toothpicks painted black for the 140mm version)
9 plug wires (I used actual thin electrical wire attached with CA
The pushrods and wires are only required for the forward section. The wires and pushrods for the rear cylinders would have been on the backside anyway and are not needed to complete the look.
| 18cyl_rear_140mm.stl | 21.0MB | |
| 18cyl_rear_400mm.stl | 4.2MB | |
| 9cylRadial1part_140mm.stl | 29.4MB | |
| 9cylRadial1part_400mm.stl | 5.8MB | |
| 9CylRadial_IR_140mm.stl | 774.3KB | |
| 9CylRadial_IR_400mm.stl | 153.6KB |
