Model of Rick C-137's 9 gauge plasma pistol (and the slightly different, "fake" version) from Rick and Morty S03E01 ("The Rickshank Redemption") and other episodes.
There are two versions of the main body: one that's completely hollow, and one with a structure inside it designed to reduce the amount of support material needed (select "Supports: Everywhere" in Cura, or the equivalent in your other slicer of choice). There's also an optional part that can be helpful in aligning the endcap on the rear of the main body.
The model is split into sections for best print quality, and for making painting a bit easier. The parts of the barrel screw together, and are numbered in order (from the body to the muzzle). The finished barrel also screws into the main body.
| Barrel_-_Part_1.stl | 625.3KB | |
| Barrel_-_Part_2.stl | 66.6KB | |
| Barrel_-_Part_3.stl | 254.3KB | |
| Barrel_-_Part_4.stl | 545.4KB | |
| Barrel_-_Part_5.stl | 530.2KB | |
| Endcap_-_Morty_Version.stl | 61.6KB | |
| Endcap_-_Rick_Version.stl | 232.0KB | |
| Endcap_Alignment_Part_-_Optional.stl | 21.3KB | |
| Hammer_-_Morty_Version.stl | 243.2KB | |
| Handgrip_-_Left_Half.stl | 524.0KB | |
| Handgrip_-_Right_Half.stl | 524.0KB | |
| Main_Body.stl | 398.5KB | |
| Main_Body_with_Support_reducer.stl | 418.8KB | |
| Slide.stl | 824.7KB | |
| Trigger.stl | 133.7KB |
