This is a simple vent for the left side of the drivers side steering wheel in the 8V Audi A3/S3/RS3 (2012-2019) perfect for Cobb or other tuning boxes or maybe an airlift controller! I wouldn't recommend a full phone but if you want to remix it the CAD files are there.

Assembly requires M4x20 bolts. It's a bit tight. Might not be a bad idea to get a tap for now. Will adjust files.

Also required: double sided tape. 3M or something similar.

Required Files:
Base STL.stl
Connector to Dash.stl
Cobb Mount.stl

Other files plus some explanation.

Base CAD.step - CAD file for Base

Cobb Mount CAD.step - CAD file for Cobb Mount

Connector to dash preslice.step - this is the connector file but CAD, this does require some effort to remix. You will need to make the changes you want; and in Fusion convert to a Surface and then use the combine tool between that surface and the 3D Scan Filled.stl file.

3D Scan Filled.stl - this is the 3D scan file, but cut down to only what is required for the slice. the back is also filled which helps in some softwares.

3D Scan - This is the 3d scan of this area of the dash if you need it for something else, pretty low res file, Scanned with revopoint inspire.