8mm Bar End Mirror Adapter 3D Printer Model
The file '8mm Bar End Mirror Adapter 3D Printer Model' is (SLDPRT,STL) file type, size is 127.3KB.
The file '8mm Bar End Mirror Adapter 3D Printer Model' is (SLDPRT,STL) file type, size is 127.3KB.
Adapter for an 8mm bar end. This was designed for a driven D-Axis bar end mirror. Fitted for a 2015 Kawasaki Z1000 but may work on other make/models. You will need 4 washers and 2 shaft collars for the mirror to clamp onto, these are easily found at your local hardware store. Remove set screw from shaft collar.
Shaft collars can be found here:
http://www.mcmaster.com/#9946k14/=w3yk38
OD=7/8
Shaft=7/16
Width=7/16
Washers are here:
http://www.mcmaster.com/#standard-washers/=w3ykyk
Screw size=M8
OD=16mm
ID=8.4mm
Bottom piece needs supports, top does not. Printed at 2mm in ABS.
UPDATE: Replace model for bottom piece. Original had error that made it too thick causing stock bolt to be short.
| BarEndBottom.SLDPRT | 171.0KB | |
| BarEndTop.STL | 148.9KB |
