8BitDo Ultimate Parallel Switch Mount 3D Printer Model
The file '8BitDo Ultimate Parallel Switch Mount 3D Printer Model' is (stl) file type, size is 144.6KB.
The file '8BitDo Ultimate Parallel Switch Mount 3D Printer Model' is (stl) file type, size is 144.6KB.
took the controller part of the ultimate mount by Umbrellacorp53 with the switch holding part of the sn30 pro mount by kelsier, as well as making a few different angles.
The difference between Umbrellacorp53's mount and mine is that his mount has the switch above the controller rather than on top, making the controller and switch lean backwards because the switch is heavier, which personally makes my wrists sore after a while of holding it upright against its weight
Tilted shifted has the best overall center of balance and comfort
Tilted back is good for playing while standing up but puts strain on your fingers
The balanced mount's center of gravity is slightly away from you, it's good when sitting upright but your hands can get tired after a while
the horizontal angle version isn't really comfortable, but I'll leave it in.
print in PLA, sideways, with supports, and with 25% infill or more.
| balanced_mount.stl | 103.9KB | |
| horizontal_ultimate_mount.stl | 98.1KB | |
| slightly_tilted_back_mount.stl | 99.5KB | |
| tilted_shifted.stl | 109.3KB |
