858D SMD Rework Station Back Panel Mod 3D Printer Model
The file '858D SMD Rework Station Back Panel Mod 3D Printer Model' is (skp,stl) file type, size is 3.5MB.
The file '858D SMD Rework Station Back Panel Mod 3D Printer Model' is (skp,stl) file type, size is 3.5MB.
I wanted to add a removable C14 type plug cable on the back of my 858D SMD rework station since I don't like permanently attached cables, initially I was going to just cut a hole on the back of the original case cover and just mount it there, but then I decided to mount the quad C13 plug I had from a failed UPS, so It was easier to make things fit and 3d print them and just cut a bigger hole on the back of the case and mount it there.
Thies requires 6x M3 heatset threaded inserts or equivalent for it to be mounted on the back of the case and for the C14 plug.
| 858D_Soldering_Station.skp | 2.6MB | |
| C14+4xC13.stl | 43.1KB | |
| C14+Fuse+4xC13.stl | 48.6KB | |
| C14+fuse+switch+4xC13.stl | 50.2KB | |
| C14+fuse+switch.stl | 48.6KB | |
| C14+Fuse.stl | 47.6KB | |
| C14+switch+4xC13.stl | 44.1KB | |
| C14+switch.stl | 43.1KB | |
| C14.stl | 42.2KB | |
| honeycomb-C14+4xC13.stl | 214.0KB | |
| honeycomb-C14+Fuse+4xC13.stl | 185.5KB | |
| honeycomb-C14+fuse+switch+4xC13.stl | 131.2KB | |
| honeycomb-C14+fuse+switch.stl | 418.9KB | |
| honeycomb-C14+Fuse.stl | 473.2KB | |
| honeycomb-C14+switch+4xC13.stl | 153.7KB | |
| honeycomb-C14+switch.stl | 413.5KB | |
| honeycomb-C14.stl | 501.7KB | |
| slots-C14+4xC13.stl | 296.3KB | |
| slots-C14+Fuse+4xC13.stl | 301.7KB | |
| slots-C14+fuse+switch+4xC13.stl | 303.3KB | |
| slots-C14+fuse+switch.stl | 365.0KB | |
| slots-C14+Fuse.stl | 364.0KB | |
| slots-C14+switch+4xC13.stl | 297.2KB | |
| slots-C14+switch.stl | 359.6KB | |
| slots-C14.stl | 358.6KB |
