This remote-controlled boat is designed for family 3D printers. The printing process only requires printing in the correct orientation, eliminating the need for support structures, thus saving a significant amount of material.Additionally, the following accessories need to be purchased: 3× M3 65mm screws, 5× M3 60mm screws, 10× M320mm screws, a ChiHai RD370 motor, an MG90S servo,3mm150mm complete boat shaft assembly (outer diameter of the bushing is 8mm, length is 100mm with 2mm Universal Joint )， a HOTRC CT6A remote controller, a HOTRC F08A receiver, and a QUIC RUN 1060 brushed electronic speed controller. You can purchase a suitable 12V lithium battery, and it is recommended to use a T-type connector (as long as it is consistent with the electronic speed controller).
| Body1.stl | 35.7MB | |
| Body2.stl | 75.1MB | |
| Body3.stl | 55.9MB | |
| Decker.stl | 79.7MB | |
| Lid1.stl | 25.7MB | |
| Lid2.stl | 31.2MB | |
| Motor_holder.stl | 109.4MB | |
| Rudder.stl | 45.7MB |
