80mm Fan To 2inch Hole Adapter. 3D Printer Model
The file '80mm Fan To 2inch Hole Adapter. 3D Printer Model' is (stl) file type, size is 256.6KB.
The file '80mm Fan To 2inch Hole Adapter. 3D Printer Model' is (stl) file type, size is 256.6KB.
This adapts an 80mm fan to a 2 inch hole. This is the final piece used to vent my Da Vinci printer.
Why a 2 inch hole you ask? - That's the size of the hole saw I have.
Why vent abs fumes? After reading the following, I thought it a good idea:
http://www.sciencedirect.com/science/article/pii/S1352231013005086
http://www.mindfully.org/Health/2004/Nonoparticles-On-Brain2004.htm
I used the Davinci 80mm fan exhaust by philharlow for the piece that attached the vent hose to the printer. Thanks, Philharlow.
ALSO, The goopy stuff you see in the photo is extra caulk i had lying around. You may want to use something too as the connection is not completely air tight. Since there is positive pressure after the fan, a little air will leak out. You will probably be better than me at making it look pretty...
| davincivent1.stl | 707.6KB |
