8 Legged Spider Robot 3D Printer Model
The file '8 Legged Spider Robot 3D Printer Model' is (stl) file type, size is 2.5MB.
The file '8 Legged Spider Robot 3D Printer Model' is (stl) file type, size is 2.5MB.
Video can be found here: https://www.youtube.com/watch?v=Hj8gsWjy_DY
STL and Editable Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/8-legged-spider-robot-files
The goal of this robot was to keep it as simple as possible but remain the most important movements. This robot uses 4 micro servo's salvaged from old and broken indoor rc-planes and helicopters. these servo's are controlled by an arduino nano and powered by two 1 cell 200mAh lipo battery's. To control the movement of the robot I use a Bluetooth transeiver connected with an android device. This allows me to make the robot go forwards, backwards, turn left and turn right.
more info can be found here : https://hackaday.io/project/26049-8-legged-spider-robot
Components used:
1 × arduino nano V3
link: https://www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Version-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135
1 × Geekcreit® HC-06 Wireless Bluetooth Transceiver
link: https://www.banggood.com/HC-06-Wireless-Bluetooth-Transceiver-RF-Main-Module-Serial-For-Arduino-p-80364.html?p=E01411629100201406T1&custlinkid=255202
2 × 1 cell 300 mAh LIPO battery
link: https://www.banggood.com/5Pcs-URUAV-3_8V-300mAh-4080C-1S-HV-4_35V-PH2_0-Lipo-Battery-for-Eachine-TRASHCAN-Snapper6-7-Mobula7-p-1405460.html?rmmds=search&cur_warehouse=CN
4 × linear micro servo
I used 4 linear micro servo's from a broken blade mcpx.
1 × Android device
Recommended tools:
Paypal: https://paypal.me/BrockenBrian
Feel free to take a look at my other designs:
3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065
Have a nice day!
| high_hinge_left.stl | 69.1KB | |
| high_hinge_right.stl | 69.1KB | |
| hinge.stl | 42.7KB | |
| left_aft_leg.stl | 72.2KB | |
| left_front_leg.stl | 72.2KB | |
| left_midle_aft_leg.stl | 132.9KB | |
| left_midle_front_leg.stl | 132.9KB | |
| long_hinge.stl | 58.6KB | |
| movable_plate_holder_1.stl | 6.3KB | |
| movable_plate_holder_2.stl | 5.9KB | |
| movable_plate_holder_3.stl | 6.3KB | |
| movable_plate_left_right.stl | 87.6KB | |
| movement_hinge.stl | 66.4KB | |
| outer_frame_left_side.stl | 480.4KB | |
| outer_frame_right_side.stl | 480.4KB | |
| outer_hinge.stl | 190.5KB | |
| pushrod.stl | 90.1KB | |
| servo_base.stl | 233.5KB | |
| slider.stl | 86.3KB | |
| small_hinge.stl | 63.4KB | |
| spider_robot.stl | 6.9MB |
