This Retro Mario figure was modeled from a Nintendo Wii U Amiibo Mario Figure. I really liked the look, so I designed a version that could be 3d printed.
Check out my process for designing this thing here
Take a look below for some additional information if you decide to print.
YOUR PRINTER SHOULD HAVE DECENT ACCURACY TO PRINT THIS. This model has a large number of tightly arranged parts with just enough gap to interlock. If your side walls are wavy or have a big "elephant foot" effect, parts might not fit or a tolerance stack up could produce bad results.
 | |
 | |
| BLACK_-_EYES-2.STL | 1.6KB | |
| BLACK_-_MUSTACHE-2.STL | 3.3KB | |
| BLUE_-_BODY-LOWER-2.STL | 9.0KB | |
| BLUE_-_BODY-UPPER-2.STL | 13.9KB | |
| BROWN_-_HAIR-BACK-2.STL | 5.6KB | |
| BROWN_-_HAIR-FRONT-2.STL | 11.2KB | |
| BROWN_-_L-FOOT-2.STL | 4.0KB | |
| BROWN_-_R-FOOT_INNER-2.STL | 2.8KB | |
| BROWN_-_R-FOOT_OUTER-2.STL | 3.1KB | |
| RED_-_BACK_UNDERSHIRT-2.STL | 684.0B | |
| RED_-_FRONT_UNDERSHIRT-2.STL | 2.3KB | |
| RED_-_HAT-2.STL | 7.7KB | |
| RED_-_L-ARM_INNER-2.STL | 5.8KB | |
| RED_-_L-ARM_OUTER-2.STL | 6.5KB | |
| RED_-_R-ARM_INNER-2.STL | 4.3KB | |
| RED_-_R-ARM_OUTER-2.STL | 2.9KB | |
| SKIN_-_HEAD-FRONT-2.STL | 8.7KB | |
| SKIN_-_HEAD-REAR-2.STL | 5.7KB | |
| SKIN_-_L-EAR-2.STL | 1.8KB | |
| SKIN_-_R-EAR-2.STL | 1.8KB | |
| STAND.STL | 1.4KB | |
| WHITE_-_HAT-DETAIL-2.STL | 684.0B | |
| WHITE_-_L-HAND-2.STL | 3.0KB | |
| WHITE_-_R-HAND-2.STL | 2.5KB | |
| YELLOW_-_L-BUTTON-2.STL | 684.0B | |
| YELLOW_-_R-BUTTON-2.STL | 584.0B |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
